ECU diagonositic/OBD diagonostic testing equipment

The OBD test equipemnt 1:the regulations of SAE Standard J2901 in the USA 2:used in labrary 3:for gas car

Misfire generator

Introduction

Engine misfire results in increased emission and damage to the three-way catalyst converters in the condition of high misfire rate. Therefore, diagnosis of the engine misfire is one of the most important items of vehicle OBD systems. Misfire generator is a powerful device used for the development, calibration and testing of the engine misfire diagnosis functions in the vehicle powertrain systems.

Misfire Generator, the misfire generators developed by Beijing Unison Electronics Technology  Co., Ltd., meets the regulations of SAE Standard J2901 in the USA. The ignition state in each cylinder is judged by monitoring the ignition control signal coming from the ECU. The misfire command signal, generated according to the configurations of the users, will block the corresponding ignition signals and thus cause the engine misfires.

The main customers of Misfire Generator include General Motors, Delphi, MagnetiMarelli, Bosch,

Continental, SAIC, SVW, PATAC, CFMA, CHINA FAW, CAERI, FOTON, GWM, BYD, LIFAN, etc.

Main characteristics

16 bit MicrocontrollerPowerful functions, flexible design and high extensibilitySupport Waste Spark Ignition System and COP Ignition SystemSupport Multi-Strike Sub-Pulse Selection ModeSupport both Smart Coil System and Non-Smart Coil SystemDevelop Aux. Module to achieve the connection with Non-Smart Coil SystemSufficient safety guarantee: Operator keeps away from force electricityTwo kinds of Misfire Modes: EVENT Mode and ENGINE CYCLE ModeA wide variety of misfire types can be simulated: Single Cylinder Misfire, Multi-Cylinders Misfire, Indicated Cylinders Misfire, Random Misfire, Periodic Misfire, etc.Configurable Misfire INTERVAL and Applied Cylinders SELECTION on the panelPort to PC, provide PC software for the configuration of Misfire GeneratorMisfire Rate configurable between 0~99.9%, Accuracy: +/- 0.1%LED display of %MF of All Cylinders and %MF of Applied CylindersLED display the current Misfire CylindersProvide power-on self-test functionSupport the engine with max. 12 cylindersSufficient Electrical Protection: Static Protection, Reverse Power Protection, Short Circuit ProtectionSmall and compact, satisfying the application demands of the automotive industry

Basic parameters

Working Voltage: 7~33VDCWorking Temperature: -40°C ~ +120°CInput Voltage: 0~5V, Output Voltage: 0~5VInput Resistance: > 7K Ω,Output Resistance: 100 ΩSize: 220×165×50(mm), Weight: 1.5kg

ECU diagonositic/OBD diagonostic testing equipment